Menu
UDT tubing retrievable injection pressure operated gas lift valves uses nitrogen charged, multi ply monel bellows to provide the force necessary to maintain the valve normally in closed position. These gas lift valves are installed in conventional mandrels for injection of gas into the tubing string. These valves are manufactured in variety of port sizes to suit a wide range of gas injection volume and flow rates. All the gas lift valves features floating valve seat, which facilitates seat change outs to make valve repair easier and more economical.
Injection gas enters the valve and acts on the effective bellow area. As the injection gas pressure overcomes the precharged pressure, the bellow compresses and lifts the stem tip off the seat. Injection gas then flows through the seat, past the reverse flow check valve, and into the production tubing. These valves are fitted with reverse flow check valves at the bottom to prevent production fluid backflow. The reverse flow check valves have elastomeric primary seal and metal to metal secondary seal to prevent tubing to casing communication. Reverse flow check valves are rated to 5000 psi differential pressure.
We provide top-quality easy to operate GAS LIFT EQUIPMENTS for a safe, reliable, and productive drilling experience.
Orifice valves controls the volume of gas through the valve into the production conduit. These valves are used for continuous injection of gas. They are fitted mostly at the bottom of the wells.
Read More
Dummy valves are used to blank off communication between tubing and casing. In new installations, dummies can be retained in the mandrels until gas lift valves are required.
Read More
Side pocket mandrels are a part of tubing string. Side pocket mandrels features an oval body design and threaded connections for installation. in the tubing string.
Read More
UDT kickover tools are used to insert & retrieve wireline retrievable gas lift valves, orifice valves and dummy valves from the side pocket mandrel pocket.
Read More
UDT tubing retrievable reverse flow check valves are attached to the bottom of tubing retrievable gas lift valves that do not have an integral check valve to.
Read More
UDT conventional gas lift mandrels are equipped with external lugs to receive tubing-retrievable gas lift and orifice valves.
Read More
UDT wireline retrievable injection pressure operated gas lift valves uses nitrogen charged, multiply monel bellows to provide.
Read More
UDT running tools are used to install wireline retrievable gas lift valves, orifice valves and dummy valves into the side pocket mandrel pocket.
Read More
UDT pulling tools are used to retrieve wireline retrievable gas lift valves, orifice valves and dummy valves from the side pocket mandrel.
Read More
UDT offers a variety of wireline-retrievable latches for locking gas-lift valves, orifice valves and dummy valves into the appropriate.
Read More UDT’s oilfield equipments and tools help minimize cost, maximize production, thus ensuring superior performance and delivering positive results every time.
The risk of unintentional sidetracking, vibrations & drill pipe whirl of bottom hole assembly
Explore
Drilling through rocky formations can lead to the caving of weak formations in a borehole.
Explore
Low reservoir pressure makes lifting of oil and gas from the earth to the surface difficult.
ExploreUDT downhole tools are used in a variety of formations to perform reaming operations during drilling.
Integral blade stabilizer (IBS) is a one piece rotating stabilizer which can be placed near bit or up in the drill.
Explore
Replaceable sleeve stabilizers consist of replaceable sleeves that are mounted on the mandrel body.
ExploreUDT gas lift equipment are used for effective gas lift operations in straight and deviated wells.
UDT wireline retrievable injection pressure operated gas lift valves uses nitrogen charged, multiply monel bellows to provide the force necessary to maintain the valve normally in closed position.
Explore Orifice valves controls the volume of gas through the valve into the production conduit. These valves are used for continuous injection of gas. They are fitted mostly at the bottom of the wells.
Explore Dummy valves are used to blank off communication between tubing and casing. In new installations, dummies can be retained in the mandrels until gas lift valves are required to.
Explore
UDT tubing retrievable injection pressure operated gas lift valves uses nitrogen charged, multi ply monel bellows to provide the force necessary to maintain the valve normally in closed position.
Explore UDT conventional gas lift mandrels are equipped with external lugs to receive tubing-retrievable gas lift and orifice valve.External guards are attached to the outside diameter of the mandrels.
Explore Side pocket mandrels are a part of tubing string. Side pocket mandrels features an oval body design and threaded connections for installation in the tubing string.
Explore UDT offers a variety of wireline-retrievable latches for locking gas-lift valves, orifice valves and dummy valves into the appropriate side-pocket mandrel.
Explore UDT running tools are used to install wireline retrievable gas lift valves, orifice valves and dummy valves into the side pocket mandrel pocket.
Explore UDT pulling tools are used to retrieve wireline retrievable gas lift valves, orifice valves and dummy valves from the side pocket mandrel pocket.
Explore UDT kickover tools are used to insert & retrieve wireline retrievable gas lift valves, orifice valves and dummy valves from the side pocket mandrel pocket.
Explore UDT tubing retrievable reverse flow check valves are attached to the bottom of tubing retrievable gas lift valves that do not have an integral check valve to prevent.
ExploreUDT wireline winch units are used in both offshore and onshore areas and can be used for production and reservoir operations.
UDT make Skid mounted one or two piece wireline unit comprising power pack module with 84-125hp diesel engine and winch unit. This is compact...Read More.
Explore
UDT make Skid mounted one or two piece wireline unit comprising power pack module with 84-125 hp diesel engine and winch unit. This is compact.Read More
Explore
UDT make Truckline unit is a truck mounted wireline winch unit consisting of reel skid and power skid suitably mounted on right hand 6x4 drive.Read More...
Explore
Land line winch consists of Reel Skid (includes Drum compartment and operator cabin) and crane mounted on the rear of truck chassis delivering.Read More..
Explore
This is a Skid/trailer mounted, self contained, steel skid base structure, single drum wireline unit designed to provide....Read More.
Explore
This is a skid mounted, self contained, steel skid base structure, single drum wireline unit designed to provide a light weight, compact winch....Read More.
ExploreUDT range of connectors are suitable for a wide array of applications such as Drilling, Driving (Piling), Drill & Drive, Jetting, Offshore Jack-up, Offshore Subsea, Slot Recovery, Drilling with Casing and more.
UDT-Leopard is a high strength connector which has been used in many different applications.
Explore
UDT Swift is a heavy duty connection offering gas tight, metal to metal seal for gas wells.
Explore
UDT Lynx is a weight set connector. Non Rotational with no tooling & connection is fully
Explore
The Puma is a flush-threaded connector for use on exploration and platform drilling operations .
Explore
by UDTL.