Integral Blade Stabilizer

 
  • Overview
  • Features
  • Specification
 

INTEGRAL BLADE STABILIZERS<

 

In order to significantly improve the safety & life span of stabilizers UDT has offered after extensive engineering studies and field experience the Integral Blade Stabilizers. "UDT Make" integral blade stabilizer has a single body made of 4145 H modified alloy steel fully heat-treated to 285-341 Brinell hardness and 40 ft lb minimum impact strength. UNITED stabilizers are available in either near bit or string type.Connections are coldrolled, phosphatized, coated and equipped with thread protectors. These are gauged to API standards. “UDT MAKE” Integral Blade Stabilizer are sturdy, rugged and easy to repair and maintain tools which can be safely used in highly deviating wells for side tracking and fishing etc. Our stabilizer shall provide 250 to 360 degree hole wall contact and the rib surface shall be hard faced as described under heading hardfacing.

 
 

SPECIAL FEATURES:

 

Deep spiral machining to allow maximum mud circulation.
Long fishing neck and bottom neck.
Wide blades and long wall contact to increase wear resistance and wall contact.

 
 
DIMENSIONAL DATA – INTEGRAL BLADE STABILIZERS
Hole Size Range (In) DC Diameter Range (In) Blade Length (In) Blade Width (In) Fishing Neck Length (In)
6.1/8 – 6.3/4 4.1/8 - 4.3/4 10 2 20
7.3/8 - 7.7/8 5.3/4 – 6.1/4 10 2.3/8 24
8.1/2 - 8.3/4 6.1/4 - 7 15 2.3/8 24
9.1/2 – 9.7/8 7 - 8 15 2.3/8 26
10.5/8 - 11 7 - 8 15 3.1/8 26
12 - 12.1/4 7.3/4 – 9.1/2 16 4 26
14.3/4 - 15 8 - 10 16 4 26
17.3/8 – 17.1/2 8 - 10 21 5 26
22 - 23 9 - 11 21 5 30
24 - 26 9 - 11 24 5 30