Interchangeable Sleeve Stabilizer

 
  • Overview
  • Features
  • Specification
 

INTERCHANGABLE SLEEVE STABILIZER

 

"UDT MAKE" Interchangeable sleeve stabilizer comes in two different types : One piece body constructions or with a two piece body with the sleeve blocked in the middle. Different size sleeve may fit same body. It is composed of a 4145 H AISI heat treated steel mandrel and a sleeve made of special alloy steel. Hard facing on the blades can be offered in any of the four different types mentioned in section "Hardfacing”. This type of stabilizer is often used in fields where repairs and hard facing of the blades are not available and is thus a time and money saving tool.

 
 

FEATURES:

 

ORDERING INSTRUCTIONS
Hole size and type of body construction.
Drill Collar size.
Hardfacing choosen for the blade.
Connection type and size.

 
 
DIMENSIONAL DATA-INTERCHANGEABLE SLEEVE STABILIZER
Hole size Range (In) Sleeve (In) DC size Range (In) Body
Length Blade Width Bore (In) Centre Connection Fishing Neck Length (in)
6.1/8–6.3/4 14 2 4.1/8- 4.3/4 2- 2.1/4 2.7/8 IF 20
7.3/8–7.7/8 14 2.1/2 5.1/4- 5.3/4 2.13/16 3.1/2 IF 22
8.1/2–8.3/4 14 2.1/2 6.1/4- 6.3/4 2.13/16 4 IF 22
9.1/2– 14.3/4 14 2.3/4- 3.1/8 7–8.1/4 2.13/16 4.1/2 IF-
6.5/8 REG
22
14.3/4- 17.1/2 18 3.1/8 9- 9.1/2 2.13/16 6.5/8 REG 22
17.1/2-26 Up to 32 4 9- 11.1/4 2.13/16-3 7.5/8 REG- 8.5/8 REG 26